USRA Houston Repository

Browsing by Subject "Apollo 17"

Browsing by Subject "Apollo 17"

Sort by:Order:Results:

  • Simmons, Gene, 1929- (Massachusetts Institute of Technology, 1972)
  • Lavin, W. J. (Bendix Aerospace Systems Division, 1972)
    An analysis has been performed on the LSP direct drive timers to determine if the inherent safety of the experiment has been compromised by the recent changes in the safe arm slide timer and battery timer designs.
  • Simmons, Gene, 1929- (Center for Space Research and Department of Earth and Planetary Sciences, Massachusetts Institute of Technology, 1974)
    The Surface Electrical Properties Experiment (SEP) was flown to the Moon in December 1972 on Apollo 17 and used to explore a portion of the Taurus-Littrow region. SEP used a relatively new technique, termed radio frequency ...
  • Strangway, David W. (1974)
    This report consists of a series of reports, reprints and preprints that in themselves constitute a self-explanatory record of the work performed by the University of Toronto on the Surface Electrical Properties Experiment. ...
  • Strangway, David W. (1974)
    This report consists of a series of reports, reprints and preprints that in themselves constitute a self-explanatory record of the work performed by the University of Toronto on the Surface Electrical Properties Experiment. ...
  • Strangway, David W. (1974)
    This report consists of a series of reports, reprints and preprints that in themselves constitute a self-explanatory record of the work performed by the University of Toronto on the Surface Electrical Properties Experiment. ...
  • Deppe, R. H. (Bendix Aerospace Systems Division, 1971)
    On January 22, Crew Engineering performed a 1G, space-suited performance test with an Engineering Model of the LSPE Geophone Cable Reel. The purpose of these tests was to determine if the chosen geophone cable reel ...
  • Lavin, W. J. (Bendix Aerospace Systems Division, 1971)
    This Detailed System Hazard Analysis Report consists of two major sections; (1) The Detailed Fault Hazard Analysis and (2) The Fault Tree Logic Diagrams which evaluate the hazard potential of the LSP explosives during the ...
  • Min, G. B. (Bendix Aerospace Systems Division, 1971)
    The purpose of this ATM is to estimate from theoretical considerations the probability of fragments from an LSP explosive package striking the ALSEP Central Station.
  • Jones, Joseph P. (Bendix Aerospace Systems Division, 1972)
    Identifies all conditions under which the explosive components of the LSP are manufactured, tested, transported, and stored while under the cognizance of the Bendix Corporation, Aerospace Systems Division (BxA). Sufficient ...
  • Jones, Joseph P. (Bendix Aerospace Systems Division, 1972)
    The Operation Hazard Analysis evaluates all known hazards identified throughout the operational life cycle of the LSP Experiments. This analysis supplements the Detailed Hazard Analysis (ATM 1049 ).
  • Toelle, Dan. (Bendix Aerospace Systems Division, 1971)
    This ATM revision presents a supplement to the study of the LSPE High Explosive Package and transport frame stowage thermal constraints subsequent to LM touchdown and prior to lunar deployment. In addition, lunar deployment ...
  • Toelle, Dan. (Bendix Aerospace Systems Division, 1971)
    This ATM presents the study of LSPE High Explosive Package and transport frame stowage thermal constraints subsequent to LM touchdown and prior to lunar deployment.
  • Toelle, Dan. (Bendix Aerospace Systems Division, 1971)
    This ATM provides an answer to Action Iten: 521, "BxA agreed that if explosive packages are exposed to the sun for 5 hours prior to each EVA, the 40° F timer requirement will be met. BxA to revise applicable ATM with ...
  • Toelle, Dan. (Bendix Aerospace Systems Division, 1972)
    This ATM Summarizes the analytical and test results of the Lunar Seismic Profiling Experiment Thermal Control Systems. The first section introduces the hardware and develops the mathematical thermal model of the explosive ...
  • Staats, J. T. (Bendix Aerospace Systems Division, 1971)
    This ATM documents the total list of non-metallic materials used in the ALSEP Array E Lunar Seismic Profiling Experiment.
  • Toelle, Dan. (Bendix Aerospace Systems Division, 1972)
    This ATM summarizes the LSPE Design Verification Thermal Vacuum Test of the prototype model including a correlation study of the analytical thermal model.
  • Ireton, Phillip H. (Bendix Aerospace Systems Division, 1971)
    This revision of ATM 927 presents the results of parametric studies accomplished from 12/1/70 thru 1/29/71 on selection of isolators for soft mounting of the LSPE explosive pallet.
  • Staats, J. T. (Bendix Aerospace Systems Division, 1971)
    The purpose of this ATM is to list all electronic, electrical, and electro-mechanical parts used in the Lunar Seismic Profiling Experiment flight model. The tabulation of these EEE parts is divided into those used in the ...
  • Worcester, R. (Bendix Aerospace Systems Division, 1972)
    This ATM presents the test results and recommendations as to the type of foam to be used in the LSPE Housing and Charge Assembly.

Search HOU Repository

Browse

My Account