Browsing by Title

Dewhirst, D. L. (Bendix Systems Division, 1967)

This ATM outlines the structural considerations pertinent to the band mechanism which supports the graphite cask.

Bendix Corporation (Crawler-Transporter / ALSEP)

Unknown author (Bendix Aerospace Systems Division, 1969)

Bendix data transmitter housing material change

Courtois, D. A. (Bendix Aerospace Systems Division, 1970)

This ATM presents a comparison of Bendix Data Transmitters with housings machined of aluminum versus those with housings machined of magnesium. A second action item from the same meeting required an analysis of the effect ...

Bendix data transmitter qualification units

Courtois, D. A. (Bendix Aerospace Systems Division, 1970)

This ATM presents a summary of operating events which led to a decision to stop qualification testing with the Serial Number 23 unit and perform a complete qualification sequence with Serial Number 21. This ATM satisfies ...

Bi-reflector HFE electronics package thermal design

Griffin, J.; Psaros, G. (Bendix Aerospace Systems Division, 1970)

This ATM summarizes the analytical and test results of the nominal ALSEP bireflector HFE electronics package assembly thermal control system which was developed for use at the lunar equator. The test results summarized ...

Biosignature Preservation and Detection in Mars Analog Environments : May 16–18, 2016, Lake Tahoe, Nevada

Hays, Lindsay; Beaty, D. W. (David W.); Voytek, Mary A.; Meyer, Michael (Lunar and Planetary Institute, 2016)

Our objective is to focus strategies to detect a range of possible biosignatures on Mars in different categories of geologic settings by assessing the attributes and preservation potential of various biosignatures in ...

Block 3 operations plan

Neau, O. T. (Bendix Systems Division, 1966)

The Block 3 Operations Plan was originally scheduled for publication on 20 October 1966. However, as no significant changes have occurred since the publication of the Block 2 Operations Plan, ATR-18 dated 12 September 1966, ...

Block I and II mechanical and thermal design.

Unknown author (Bendix Systems Division, 1966)

As a result of a design meeting held Monday 25 April between G. Burton, L. McCartin and cognizant PE's and subsequent discussions the following design decisions were reached. All of the mandatory Block II changes should ...

Bridging the Gap II, effect of target properties on the impact cratering process: September 22-26, 2007, Saint-Hubert, Canada

Pierazzo, Elisabetta; Burchell, Mark; Osinski, Gordon R.; Herrick, Robert R. (Lunar and Planetary Institute, 2007)

The purpose of this workshop is to bring together researchers from various disciplines to address one of its major outstanding problems: the effect of target properties, such as porosity, volatiles, and layering, on the ...

Brief description of the PSE sensor exciter

Lewko, John. (Bendix Aerospace Systems Division, 1967)

The following ATM has been prepared to provide a short description and discussion of the Passive Seismic Sensor Exciter Unit used with the Passive Seismic Experiment during system testing.

Calculational investigation of impact cratering dynamics: Early time material motions

Thomsen, Jeffrey M.; Austin, Michael G.; Ruhl, Stephen F.; Schultz, Peter H.; Orphal, Dennis L. (Pergamon Press, 1979)

Early time two-dimensional finite difference calculations of laboratory-scale hypervelocity (6 km/sec) impact of 0.3 g spherical 2024 aluminum projectiles into homogeneous plasticene clay targets were performed and the ...

Calibration information for Experiments 71-063A-10 and 72-031A-09.

Bjorkholm, Paul J. (NSSDC?, 1973)

This document consists of a temperature correction procedure supplied by Dr. Paul Bjockholm of American Science and Engineering, Inc., Cambridge, Massachusetts.

Calibration of Apollo 16 lunar surface 60 mm Hasselblad cameras on Wild T-4 goniometer

Malhotra, R. C. (Lockheed Electronics Company, Houston Aerospace Systems Division, 1972-02)

Finite-focused lunar surface 60 mm Hasselblad Cameras for Apollo Mission 16 were calibrated on the Wild T-4 Goniometer

Catalog of Apollo 17 rocks. Volume 1. Stations 2 and 3 (South Massif)

Ryder, Graham (National Aeronautics and Space Administration. Space Life Sciences Directorate. Solar System Exploration Division. Office of the Curator., 1993-01)

The present volume, for the South Massif and Light Mantle, describes the 55 individual rock fragments collected at Stations 2, 2A, 3, and LRV-5. Some were chipped from boulders, others collected as individual rocks, some ...

Catalog of Apollo experiment operations

Sullivan, Thomas A. (National Aeronautics and Space Administration, 1993)

Reviews Apollo mission reports, preliminary science reports, technical crew debriefings, lunar surface operations plans, and various relevant lunar experiment documents, collecting engineering- and operation-specific ...

Catalog of Apollo lunar surface geological sampling tools and containers

Allton, Judith Haley (NASA Lyndon B. Johnson Space Center, 1989-03)

Summarizes the hardware that was used to collect and preserve lunar samples until the time that they were delivered to the receiving laboratory and curatorial facility at the Johnston Space Center. The catalog format was ...

Catalog of lunar mare basalts greater than 40 grams. Part 1, major and trace chemistry, with megascopic descriptions and rock and thin section photographs

Lofgren, Gary E.; Lofgren, Ellen M. (Lyndon B. Johnson Space Center, 1981-08)

Megascopic descriptions of 133 basaltic rocks returned from the Moon are presented along with photographs of each rock and its thin section, if available. The major and trace element chemistry of each is included wherever ...

Catastrophic Events and Mass Extinctions, Impacts and Beyond : July 9-12, 2000, Geozentrum, University of Vienna, Austria

Alvarez, Walter, 1940-; Koeberl, Christian, 1959- (Lunar and Planetary Institute, 2000)

Central Station power and thermal balance

Douthat, D. Z. (Bendix Systems Division, 1966)

This memorandum defines the manner in which central station heaters, power dumps and experiment standby are to be arranged. The five switched central station heaters are replaced by two switched power dumps.

Central Station power switching characteristics

Douthat, D. Z.; Neau, O. T.; Tosh, Warren M. (Bendix Aerospace Systems Division, 1968)

This ATM summarizes the conditions which led to the ALSEP Central Station Discrepancy Report AA 7344 and analyzes the results of trouble shooting steps performed to isolate and define the anomaly. Recommendations are made ...

Browsing by Title

Browsing by Title

Search HOU Repository

Browse

All of USRA Houston Repository

My Account