Browsing by Title

Sort by:Order:Results:

  • Results of detailed thermal analysis of the Dust Detector 
    Limbach, R. H. (Bendix Corporation, Bendix Systems Division, 1966)
    This ATM presents the results of a detailed thermal analysis of the Dust Detector. The preliminary analysis presented in ATM-482 recommended that the electronics be housed in the Central Station. Therefore, this analysis ...
  • Results of feasibility tests performed to determine the handling and mating aspects of the HFE - Astronaut Connector 
    Deppe, R. H. (Bendix Aerospace Systems Division, 1970)
    This is an unscheduled ATM which presents the results of the feasibility tests performed to determine if there are any astronaut problems associated with handling the HFE - Astronaut Connector, used in ALSEP Array D.
  • Results of shirt sleeve test on aided assist removal of ALSEP using a shortened boom 
    Micocci, Angelo J. (Bendix Aerospace Systems Division, 1967)
    This is an unscheduled ATM providing the results of a shirt sleeve test performed in the Bendix Mission and Crew Laboratory. The purpose of the test was to determine if shortening of the aided assist boom arm would affect ...
  • Results of solar cell power system panel deployment test final report 
    Micocci, Angelo J. (Bendix Aerospace Systems Division, 1968)
    This ATM includes the results of the panel deployment test utilizing the updated Crew Engineering mockup.
  • Results of the thermal mapping test on the ALSEP power conditioning unit 
    Howell, R. (Bendix Aerospace Systems Division, 1968)
    This ATM presents the results of the Thermal Mapping Test performed on the GE PCU. The test was performed between 4/9/68 and 4/11/68.
  • Results of the Workshop on Impact Cratering, Bridging the Gap Between Modeling and Observations : February 7-9, 2003, Houston, Texas 
    French, Bevan M.; Herrick, Robert R.; Pierazzo, Elisabetta (Lunar and Planetary Institute, 2003)
    Discusses how physical observations of craters, both on the Earth and on other solid bodies of the solar system, can be combined with the results from modeling of impact cratering for a better understanding of the impact ...
  • Revision of ALSEP Antenna Assembly specification 
    Hendrickson, J. E. (Bendix Systems Division, 1966)
    This is an unscheduled ATM describing changes in the ALSEP Antenna Assembly Specification.
  • The Rosiwal Principle and the regolithic distributions of solar-wind elements 
    Criswell, David R. (Pergamon Press, 1975)
    A test of the in situ accumulation of solar elements is described involving measurements of the relative concentrations of inert gases and reactive elements across sets of lunar fines samples for which mean grain size ·(m), ...
  • RPIFs to PDUCs: New Planetary Data Utilization Centers to support NASA's Planetary Data Ecosystem 
    Williams, David A. (Planetary geologist); Anderson, Robert C. (planetary geoscientist); Byrne, Shane (planetary geoscientist); Costard, François; Hayes, Alexander; Jaumann, Ralf, 1954-; Mouginis-Mark, Peter J.; Muller, Jan-Peter, Dr.; Oberst, Jürgen; Schultz, Peter H., 1944-; Spray, John G.; Stopar, Julie; https://orcid.org/0000-0003-1578-3688; Sutton, Sarah (planetary geoscientist); Watters, Thomas R. (2020)
    As the next generation of planetary scientists will rely more heavily on digital data from the PDS and other digital archives and tools to accomplish research, a new generation of Planetary Data Utilization Centers (PDUCs), ...
  • RSST failure mode summary 
    Moskowitz, Lee S. (Bendix Aerospace Systems Division, 1970)
    Releases the Failure Mode Summary into the Bendix documentation system for the Resettable Solid State Timer. The basic failure rates for the parts covered by this document were taken from ATM 879 which is the Failure Modes ...
  • RSST failure mode, effects, and criticality analysis 
    Moskowitz, Lee S. (Bendix Aerospace Systems Division, 1970)
    The major change between this document and corresponding documents as released by Gulton is the basic failure rate used in this ATM for the RCA CD4000 family of COS/MOS Fets. Bendix Reliability arrived at a more realistic ...
  • RSST math models, block diagrams and predictions 
    Moskowitz, Lee S. (Bendix Aerospace Systems Division, 1970)
    The failure rates are listed on reliability worksheets and were adjusted for temperature and stress ratios, and screening reduction factors. The numerical reliability prediction for the RSST two year lunar phase of operation ...
  • RSST/Central Station compatibility test report 
    Reynolds, W. E. (Bendix Aerospace Systems Division, 1970)
    The purpose of the engineering model Resettable Solid State Timer (RSST) I Central Station compatibility testing was to: (1) illustrate that the Central Station/RSST electrical and mechanical interfaces are compatible; (2) ...
  • RSST/lunar day counter reliability analysis 
    McGinnis, P. (Bendix Aerospace Systems Division, 1969)
    This ATM presents a Reliability analysis of the Lunar Day Counter, the Resettable Solid State Timer (RSST) and the RSST with the Lunar Day Counter as back-up for the automatic turn-off function for the ALSEP flight equipment. ...
  • S-band compatibility test 
    Whiteford, James E. (Bendix Systems Division, 1966)
    In response to Action Item B051301, the following is a statement of Bendix objectives for the proposed test and the dates of availability of the various hardware configurations.
  • Safe-arm slide ejection effect on grenade trajectory 
    Lipp, R.; Ireton, Phillip H. (Bendix Aerospace Systems Division, 1971)
    This memorandum reports the effect of the safe-arm slide ejection on the grenade range. The report also suggests a method by which the range may be computed by any interested party which includes the safe-arm slide ejection ...
  • Safety assessment report for the Lunar Seismic Profiling Experiment, Apollo 17, October 30, 1972 
    Raines, M. L. (Manned Spacecraft Center., 1972)
    This document contains the MSC Safety Office assessment of the Lunar Seismic Profiling Experiment (LSPE) which is a part of the Apollo 17 lunar surface experiments package. This report provides a description of the experiment ...
  • Sample Return from the Earth's Moon 
    Treiman, Allan H.; https://orcid.org/0000-0002-8073-2839 (2009)
    A White Paper for the NRC Planetary Science Decadal Survey, Reflecting the Viewpoints of the NASA Analysis Groups CAPTEM (Curation and Analysis Planning Team for Extraterrestrial Materials) and LEAG (Lunar Exploration ...
  • Sand Mineralogy Within the Bagnold Dunes, Gale Crater, as Observed In Situ and From Orbit 
    Rampe, Elizabeth; Castle, Nicholas; https://orcid.org/0000-0002-0608-1249; Treiman, Allan H.; https://orcid.org/0000-0002-8073-2839 (American Geophysical Union, 2018-08-29)
    Remote sensing data from orbit indicate that wind-blown sands in the Bagnold Dune Field in Gale crater, Mars, are sorted by their composition. The Mars Science Laboratory Curiosity rover studied the Bagnold Dune Field at ...
  • Scanning electron microscopy and petrography of glassy particles produced by lava fountain eruptions 
    Ladle, Garth H. (1978-08)
    A conceptual model of a lava fountain consists of a vent, spatter ramparts, fountain column, downwind plume and associated pumice deposits. Glassy particles produced by lava fountain eruptions consist primarily of sideromelane ...

Search HOU Repository

Browse

My Account