USRA Houston Repository

Browsing by Subject "Passive Seismic Experiment (Instrument)"

Browsing by Subject "Passive Seismic Experiment (Instrument)"

Sort by:Order:Results:

  • ALSEP Array E engineering model subpackage no. 1 with PSE - design limit vibration test results 
    Thomas, R. (Bendix Aerospace Systems Division, 1972)
    The engineering model of array E subpackage no. 1 with PSE (EEM-SP1/PSE) was subjected to the design limit vibration levels as specified for ALSEP. The primary purpose of the test was to verify the structural integrity of ...
  • ALSEP Flight 1 PSE thermal anomaly study 
    Griffin, J. (Bendix Aerospace Systems Division, 1970)
    This ATM summarizes the results of the BxA study conducted to investigate the ALSEP Flight 1 PSE Thermal Anomaly. The purpose of the study was to 1) correlate the Flight 1 PSE sensor lunar performance results, 2) determine ...
  • ALSEP mission operational and task sequence description 
    Beindorff, Richard M. (Bendix Aerospace Systems Division, 1967)
    This ATM is submitted as the Flight 3 deployment sequence and is based on current data and flight configurations. It describes the tasks associated with the deployment of Flight 3, configuration and lists the time associated ...
  • ALSEP reliability mathematical model and prediction addendum 2 PSE 
    Hiebert, Robert W. (Bendix Aerospace Systems Division, 1971)
    As a result of the FMECA for PSE (ATM501 B-2) update, this addendum is issued to state that there are no changes in the single point failure summary or reliability prediction due to changes in the PSE drawings. This ...
  • Analysis of pressure data relating to the PSE SN03 pneumatic caging subsystem non-conformance status. Supplement 1 
    Johnson, R. S.,Jr. (Bendix Aerospace Systems Division, 1971)
    The report represented by this supplement to ATM 920 is an analysis of pressure data collected as a result of monitoring the pneumatic caging subsystem of the PSE, SN03, during the time interval extending from 10/30/70 to ...
  • Apollo 12 PSE thermal anomaly final report 
    Griffin, J.; Psaros, G. (Bendix Aerospace Systems Division, 1970)
    This ATM summarizes the results of the BxA study conducted to investigate the ALSEP Flight 1 PSE Thermal Anomaly. The purpose of the study was to (1) correlate the Flight 1 PSE sensor lunar performance results, (2) determine ...
  • Apollo 14 PSE long period oscillation 
    Goodkin, Mitchell.; Hogeboom, L.; Breseke, D. K. (Bendix Aerospace Systems Division, 1971)
    The anomalous condition, that of intermittent oscillations, of the Long Period Vertical seismometer of the Apollo 14 Passive Seismic Experiment (PSE) and the analysis and testing which was performed in the investigation ...
  • Apollo 15 PSE anomalies 
    Hogeboom, L.; Breseke, D. K. (Bendix Aerospace Systems Division, 1971)
    This ATM presents the results of the Apollo 15 Passive Seismic Experiment (PSE) Anomalies Investigation.
  • Brief description of the PSE sensor exciter 
    Lewko, John. (Bendix Aerospace Systems Division, 1967)
    The following ATM has been prepared to provide a short description and discussion of the Passive Seismic Sensor Exciter Unit used with the Passive Seismic Experiment during system testing.
  • EASEP crew systems & operations deployment task/time sequence analyses for LRRR & PSEP 
    Marrus, Leslie D. (Bendix Aerospace Systems Division, 1969)
    This EATM presents the EASEP deployment task/time sequence analyses for the Laser Ranging Retro-Reflector (LRRR) and the Passive Seismic Experiment Package (PSEP). Separate and combined task/time deployment sequences for ...
  • EASEP PSE and central station reliability prediction 
    Jones, Ralph. (Bendix Aerospace Systems Division, 1969)
    This EATM contains preliminary reliability predictions which reflect performance of the PSE and central station when deployed on the lunar surface and activated by solar cell power. The probabilities of successfully ...
  • EASEP/PSEP solar panel development design of the EASE-PSEP solar panel array 
    Gibson, R. (Bendix Aerospace Systems Division, 1968)
    The details of the solar panel design are presented.
  • Final isotope heater locations and masking pattern -- PSEP Central Station 
    Simms, R. J. (Bendix Aerospace Systems Division, 1969)
    The parametric studies have been completed. Since the thermal characteristics of the three configurations were so similar, the selection was primarily based upon mechanical considerations. A unique rectangular masking ...
  • Investigation of PSE anomalies Apollo 12 Mission 
    Hogeboom, L.; Gibson, R. (Bendix Aerospace Systems Division, 1970)
    This report provides the results of investigations of Passive Seismic Experiment (PSE) anomalies from Apollo 12 mission.
  • Passive Seismometer programming for DPS 2000 (system test set) 
    Craig, R. K.; Coleman, C. W. (Bendix Systems Division, 1966)
    This ATM is a statement of the passive seismic (PS) processing currently included in the DPS 2000 computer programs being written for the ALSEP System Test Set.
  • Plating of PSE leveling stool 
    Breseke, D. K.; Psaros, G. (Bendix Aerospace Systems Division, 1971)
    This ATM reviews the PSE Stool Plating Materials and Processes and briefly summarizes the thermal changes expected as a result of a loss of gold plate.
  • Preliminary isotope heater locations and masking pattern PSEP Central Station 
    Simms, R. J. (Bendix Aerospace Systems Division, 1968)
    A series of parametric thermal studies have been carried out to determine the optimum locations for the two heaters and the optimum masking pattern.
  • Prototype experiment pre-integration, integration & crosstalk test results 
    Wallace, R. B. (Bendix Aerospace Systems Division, 1967)
    This ATM describes the test results of the Pre-Integration, Integration and Crosstalk Tests performed on the Passive Seismic Magnetometer and Solar Wind experiments, thru the period of March-April 1967.
  • PSE Anomalies ALSEP 4 
    Hogeboom, L. (Bendix Aerospace Systems Division, 1971)
    This ATM provides the :results of an investigation of the PSE anomalies which occurred during the ALSEP 4 Lunar Mission.
  • PSE decoupled shroud qualification status list (Apollo 15, 16, and spare) 
    Howell, F. L. (Bendix Aerospace Systems Division, 1971)
    The purpose of this report is to reflect the qualification rationale and summarize the qualification test plan for the decoupled shroud and inner shroud Qual Models.

Search HOU Repository

Browse

My Account